jabra wave bluetooth headset : OVERVIEW
CHARGING YOUR HEADSETTake the AC adapter and plug its charging tip into the socket on the headset.
Plug the end of the AC adapter into a wall outlet.
The Jabra WAVE is fully charged and ready to use when the battery indicator on the StatusDisplay™ turns solid green. (Approx. 2 hours). The battery indicator stays solid green .
.
CHARGING YOUR HEADSETTake the AC adapter and plug its charging tip into the socket on the headset.
Plug the end of the AC adapter into a wall outlet.
The Jabra WAVE is fully charged and ready to use when the battery indicator on the StatusDisplay™ turns solid green. (Approx. 2 hours). The battery indicator stays solid green .
. 2. TURN YOUR HEADSET ON To turn the headset on slide the ON/OFF button towards I.
Both icons flash intermittently to indicate that the headset is powering up.
Both icons flash intermittently to indicate that the headset is powering up.
3. PAIRING YOUR HEADSET WITH YOUR MOBILE PHONEThe first time you turn your headset on, it automatically enters into pairing mode. The Bluetooth connection indicator on the StatusDisplay™ flashes blue.
For later pairing:
Make sure the headset is turned on.
Press and hold the answer/end button for approximately 5 seconds.
The Bluetooth connection indicator on the StatusDisplay™ flashes blue when the headset is ready for pairing with your phone.
Set your Bluetooth phone to discover the Jabra WAVE. Follow your phone's instruction guide. This usually involves going to a "setup", "connect" or "Bluetooth" menu on your phone and selecting the option to discover or add a Bluetooth device.
Your phone will find the Jabra WAVE. Your phone then asks if you want to pair with it. Accept by pressing "yes" or "OK" on the phone.
Your phone may ask for a pass key or PINcode to confirm. If so, then enter the PIN 0000 (four zeros).
Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat the steps.
Pairing is successful when the Bluetooth connection indicator and the battery icon show solid light. The lights will stay solid for 5 seconds and then turn off.
If you are wearing the headset, the voice guidance will say “connected”.
For later pairing:
Make sure the headset is turned on.
Press and hold the answer/end button for approximately 5 seconds.
The Bluetooth connection indicator on the StatusDisplay™ flashes blue when the headset is ready for pairing with your phone.
Set your Bluetooth phone to discover the Jabra WAVE. Follow your phone's instruction guide. This usually involves going to a "setup", "connect" or "Bluetooth" menu on your phone and selecting the option to discover or add a Bluetooth device.
Your phone will find the Jabra WAVE. Your phone then asks if you want to pair with it. Accept by pressing "yes" or "OK" on the phone.
Your phone may ask for a pass key or PINcode to confirm. If so, then enter the PIN 0000 (four zeros).
Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat the steps.
Pairing is successful when the Bluetooth connection indicator and the battery icon show solid light. The lights will stay solid for 5 seconds and then turn off.
If you are wearing the headset, the voice guidance will say “connected”.
4. ACCEPTING A CALL ON THE HEADSETTap the Answer/End button on your headset to answer the call.
5. ENDING A CALL ON THE HEADSETWhen you want to end a call, tap the Answer/End button on your headset.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.